International Conference on

Plastic Engineering & Polymer Science

Plastic Engineering 2019

Theme: Excellence in Research and Innovation for Humanity

International Conference on Plastic Engineering & Polymer Science is scheduled on June 25-26, 2019 in Tokyo, Japan.  This conference builds efficient keynote presentations, oral talks, poster presentations and performances. The plastic engineering conference establish a platform to share and gain knowledge by concentrate on the topics of  biopolymers, bioplastics, biomaterials, polymer science, tissue engineering and regenerative medicine, biodegradable polymers, composite polymer nanotechnology. This polymer science conference deliver together academicians, professors, researchers, and scientists, students in all the areas of biomaterials, polymer science, nanotechnology and chemistry to collaborate and intend their leading scientific researches with global esteemed scientists and advance progress in biopolymers and bioplastics. Practitioners and educators to current and deliberate the most recent modernization  trends and concerns as well as constructive challenges come across and solutions maintain in the fields of plastics engineering and polymers.

Why to Attend?

International Conference on Polymer Science and Engineering 2019 which is going to be the vast conference committed to polymer science professionals providing a premier technical forum for broad casting and learning about the latest new formation technologies developed during the course of time along with consider their applications.

The main objective of the plastic engineering meeting is to concentrate on finding out around polymer science and technology; this is the best contingent to meet many immense professionals, scientists from throughout the world.

Why in Japan?

Japan supports innovative and collaborative research on plastic engineering and biopolymers, and explores to build a sustainable research and education programs. our biopolymer congress is designed to attract the best training, research, and health care practitioners to Tokyo. The scope for research is broad, and will take full advantage of the extensive global network of expert faculty, researchers and educators.

Session 1: Plastics Engineering - Current Innovations & Applications

Today plastics have been more widely discussed in popular media. Mostly visible pollution of our oceans has attracted major attention across the media landscape. At the same time, the fact that these materials have significantly contributed to prosperity, health and the safe supply of water, food and energy and not least to growing mobility and agile communication in modern societies hardly receives a mention.The engineering plastics market is estimate to reach USD 108.68 Billion by 2026, at a CAGR of 7.4% from 2016 to 2026. The market is expected to archives a CAGR of 4.99% during the forecast period, 2018 to 2023. PET influence the global engineering plastics market with approximately 24% share globally, while PEEK segment is estimated to register the fastest CAGR over the outlook period.

Session2: Composite Plastic Materials

The demand for engineering plastics is growing from various end-user sectors along with electrical, electronics, automotive & transportation sector in China. Automotive is one of the fastest developing sectors in developing economies like China due to the rise in disposable income amidst the population and various other factors. The sufficient opportunity of raw materials and low cost of production estimated to break through the demand for engineering plastics market in the country.

Session 3: Polymer Chemistry

The market has seen significant growth in developing countries such as India, China, and Brazil, as consumer's purchasing power is increasing. Also the population of these countries is increasing, which increase the demand for essential products, which in turn, is driving the market growth. Some industries are primarily substituting paper, glass, and metals with polymers, owing to their low weight and cost. Now-a-days observed polymers, in different industries, including building and construction, packaging, consumer goods, electronics and telecommunication, and automotive due to polymer market is increasing demand worldwide.

Session 4: Plastics in packaging

Higher demand for flexible and functional packaging, largely for packaged food, frozen foods and beverages, is projected to positively impact segment growth in the near future.In 2025 expected to reach USD 269.6 billion of global plastic package marketing and will register a CAGR of 3.9% during the forecast period, according to a new report Increasing use of plastic packaging in widespread applications, including food and beverages, personal care, household care, consumer electronics, and construction, is likely to drive industry growth over the forecast period.

Session 5:  Plastics Revolutionized Healthcare

Plastics can be formed into endless shapes and products. tubing syringes, IV bags, catheters, labware, surgical instruments, films for packaging, housings, and connectors are just a few examples of the wide array of plastics based medical devices. As compare to plastics instrument metal, ceramics, and glass are strong materials but inherently inflexible, which limits their usage remarkably. That’s why plastics lead superlative in the world of medical devices. It is no chance that plastics have largely outflanked other materials.

Session 6: Polymer Degradation and Stabilization

Asia-Pacific has the highest contribution in the market, accounting for nearly 50% of the global market share in 2017. The market for Asia-Pacific is driven mainly because of the increasing demand for engineering plastics by the end user industries along with electrical & electronics, automotive and transportation. Also, with the increasing automotive production in the considerable economies in the region, the market for engineering plastics has benefited  to a great extent.

Session 7: Nanomaterial and Nanotechnology

The global nanomaterial and nano technology market was predicted at USD 89,893.90 million in 2017. The market is expected to catalogue a CAGR of 4.99% all the while the forecast period, 2018 to 2023. Plastic engineering technology dominated the global engineering plastics market with virtually 24% share globally, while the PEEK segment is estimated to register the fastest CAGR over the forecast period. 

Session 8: Processing & Analysis of Polymer melt flow

Engineering plastics are association of plastic material which has better mechanical and thermal equity. The faction of plastic such as polystyrene, PVC, polypropylene and polyethylene are used as Engineering Plastic. These materials have unique properties such as higher impact strength, high abrasion, wear and fatigue protection. Engineering Plastic are fabricated for special applications due to which they are valuable.

Session 9: Plastics & Rubber Innovative Materials

Due to high demand the growth in the plastics and rubber products manufacturing market is very high for ready to wear apparel products from developed countries and developing countries such as China and India, increasing health consciousness among customers and increase in the taxes levied by many state and national governments, growth of e-commerce and government regulations. By 2022 it would be expected to reach $1.7 trillion manufacturing market size of the plastics and rubber products, significantly growing at a CAGR of around 5% during the forecast period.

Session 10: Renewable Resources and Biopolymers

The renewable resources contribute an incentive to extend non-renewable petrochemical materials. The agriculture industry produces satisfactory supplies of some agricultural products that could be used as renewable sources for polymer feed stocks, either through direct use or diffusely as carbon sources to drive fermentation processes. Biodegradability is a further benefit of renewable sources of polymers. This session presents the new biomass based configuration from renewable resources.

Session 11: Polymer Material Science and Engineering

The europe engineering plastics market has been predicted at USD 20,015.42 million in 2017. The market is approximated to register a CAGR of 3.92% during the outlook period, 2018 to 2023. PET dominated the European engineering plastics market with nearly 27% share in Europe, while PEEK segment is estimated to register the fastest CAGR through the forecast period, 2018-2023

Session 12: Polymer Industry Market & The Next Generation

The main thing for humans in the future will be energy resources, food, health, mobility & framework and communication. The foremost objective in the upcoming decades will be the population that is increasing deliberately, the concentration of people in inclusive urban centres, globalization and the expected diversity of climate. There is no doubt that polymers will play a key role in finding successful ways in approach these new challenges in the industry.

Market Analysis:

The global engineering plastics market - segmented by Product Type, Application, and Geography - Growth, Trends and estimates (2018 - 2023) report has been combined to Research and Markets contribution. The global engineering plastics market has been predicted at USD 89,893.90 million in 2018. The automotive & transportation utilization regarded for the largest share of the global engineering plastics retail and is forecast to continue during the outlook period, both long term and short term. Engineering plastics are recycling in automobile manufacturing, as these benefit in compressing the overall density and further help in diminishing vehicular emissions.

Plastic Engineering in America: The market of plastic engineering & polymer science in USA is expected to register a CAGR of 4.99% amid the estimate period, 2018 to 2023.The global engineering plastics market has been estimates at USD 89,893.90 million in 2017. The america market is expected to register  a CAGR of 4.99% during the forecast period, 2018 to 2023. 

Plastic Engineering in Europe: The Europe engineering plastics market has been estimated at USD 20,015.42 milion in 2017. The market is expected to register a CAGR of 3.92 % during the forecast period , 2018 to 2023.PET dominated the European engineering plastics market with nearly 27% share in Europe , while PEEK segement is estimaated to register the fastest CAGR through the forecast period, 2018-2023.

Plastic Engineering in Asia: Companies are accomplishing excessive research & development movements to innovate and promote new products which can open new channel of operations. Engineering plastics are penetrating medical applications expected to the new evolutions taking place in the field in Asia Countries. Asia-pacific has the highest share in the market, accounting for nearly 50% of the global market share in 2018.

Plastic Engineering and Biopolymers Universities in America:

Michigan State University, USA
University of Washington, USA
PDC Engineering LLC, USA
New York University, USA
Ryerson University, Canada
University of Toronto, Canada
University of Akron, Brazil

Plastic Engineering and Biopolymers Universities in Europe:

Karlsruhe Institute of Technology, Germany
Ecole des Mines de Saint Etienne, France
University degli Studi di Padova, Italy
University of Gottingen, Germany
University of Cambridge, UK
University of Manchester, UK
University of Poitiers, France

Plastic Engineering and Biopolymers Universities in Asia:

Asia Pacific University of Technology & Innovation, Malaysia
Pohang University of Science and Technology, South Korea
National University of Singapore, Singapore
City University of Hong Kong, Hong Kong
Seoul National University, South Korea
University of Science, Malaysia
Tohoku University, Japan

  • Plastics Engineering - Current Innovations & Applications
  • Composite Plastic Materials
  • Polymer Chemistry
  • Plastics in Packaging
  • Plastics Revolutionized Healthcare
  • Polymer Degradation and Stabilization
  • Nano Material and Nanotechnology
  • Processing & Analysis of Polymer Melt Flow
  • Plastics & Rubber Innovative Materials
  • Renewable Resources and Biopolymers
  • Polymer Material Science and Engineering
  • Polymer Industry Market & the Next Generation

7 Organizing Committee Members

9 Renowned Speakers

Padmanabhan Krishnan

Professor, VIT University
India

Meng-Hao Tsai

Associate Professor, National Pingtung University of Science and Technology
Taiwan

Masaru Matsuo

Associate Professor, Dalian University of Technology
China

Chao Li

Researcher, East China University of Science and Technology
China

Xian Zhang

Researcher, East China University of Science and Technology
China

Ibrahim M. H. Maafa

Assistant Professor, Jazan University
Saudi Arabia

Rathnayaka Mudiyanselage Sachini Swarnam

Head of R&D Department, Ceylon Polymer Pvt Ltd
Sri Lanka

Foram Dave

Researcher, Institute of Technology Sligo
Ireland

Bibin Sajan

Researcher, Kerala Technical Education University
India

Media Partners & Collaborations

Media Partner

Media Partner

Media Partner

Media Partner

Media Partner